Model ATV - 315 - Designed for applying large demonstration plots and maintenance spraying. Consists of 3 - 3 gallon stainless steel containers and one 15-gallon polyethylene tank. Each tank can be operated separately. By-pass agitation in poly tank. Push button switch for handle bar mounting, three sectional spray boom with 10 TeeJet diaphragm nozzle bodies, caps, tips, and screens. Universal mounting brackets.
Tractor Mounted Research Sprayer - T-30 G-6 - All
units are equipped with three sectional spray booms. All booms are supplied with
TeeJetŪ 8002VS tips and nozzle spacing is 20 inches unless otherwise specified.
The three liter containers are the smallest spray size containers designed to
be used on ATV and tractor mounted units. You will use more spray solution with
these units because it takes more solution to fill all spray lines going to each
nozzle. You should not run the spray out while actually spraying plots. When the
spray container is emptied, the pressure will increase until the boom is
emptied. All spray booms are constructed using 3/8 inch spray hose and Quick
TeeJetŪ diaphragm check valve nozzle bodies. Three Sectional Spray Boom If the motorized vehicle straddles
one row, the center section of the spray boom should consist of two nozzles with
each lateral section having four nozzles. This will provide a spray boom with 10
nozzles. If your tractor straddles two rows, the center section should consist
of four nozzles with four nozzles on each lateral section for a total of 12
nozzles. If four nozzles center section is desired, add $70.00 to the cost of
unit. When ordering tractor mounted sprayers, please specify the number of nozzles
you desire on the center section. The lateral four nozzle section can be
replaced with a two nozzle section. Nozzle spacing on all booms is 20 inches
unless otherwise specified. All nozzles are supplied with TeeJetŪ 8002VS tips
unless otherwise specified.
Catalog links below:
Sprayers
Hand Held Sprayer Units - 3, 4,
5, 6, 7
Spray Booth - 8, 9
Bicycle Sprayers - 10
ATV Sprayer Units - 11, 12
Optional Equipment - 13
Polyethylene Tanks - 14
Tractor Sprayers - , 15, 16,
17, 18, 19
Containers
SS Spray Containers
& Parts - 20, 21, 22,
23
Spray Headers - 24, 25
Plastic Containers
& Accessories - 26, 27
Log Sprayers - 28
Carrying Brackets -
29, 30
Cylinders
CO2 Cylinders & Supplies - 31
Pressure Regulators - 32, 33
Sprayer Parts
Sprayer Parts - 33
Hoses & Clamps - 33, 34
O-Rings - 34
Replacement Gauges - 34
Pipe Fittings - 35, 36, 37
Industrial Disconnects - 38, 39
Booms
Spray Booms - 40, 41, 42,
43
Spray Boom
Accessories/Parts - 43, 44, 45
Nozzle Parts - 46, 47, 48,
49
Spray Tips - 47, 48
Misc. Parts, Boom Clamps & Nozzle Bodies - 49, 50,
51
Miscellaneous
Parts & Supplies
Miscellaneous Supplies - 51, 52,
53, 54
Air & Spray Manifolds - 51
Wire Flags & Wood Stakes - 54